filling holes in composite decking . for plastic or composite decking, use an epoxy filler to fill screw holes. mix the epoxy with thinner and use a syringe to fill the holes. allow the epoxy to dry, then sand it so that it is flush with the deck.
i'm looking for suggestions on the best way to fill small nail holes in pvc boards. for larger nail and screw holes we're using either bond-n-fill or white cor-tex plugs, but for a lot of fastening we're shooting s.s. finish nails, and that's where we're having trouble. best method of filling small holes in pvc trim ?? thanks for the
make composite deck plugs - instructables. the composite deck boards worked with hidden fasteners, but the composite boards on . i couldn't find any plugs to cover the screw heads from the major retail hardware . use a hammer drill on a scrap piece of decking to punch out holes.
fill larger holes with a screw in a color matching the deck surface. or drill a hole ¼ inch wide and about ½ inch deep and cut a ¼-inch dowel to fit in it. 'how to repair nail holes in a
1. check underneath the cracked board. if individual composite boards are cracked on top but not on the bottom, use a drill/driver to unscrew the cracked board if possible, turn it over and screw
what should be used to fill the screw holes on a for plastic or composite decking, use an epoxy filler to fill screw holes. mix the epoxy with thinner and use a syringe to fill the holes. allow the epoxy to dry, then online message