get the highest quality results from your deck or porch staining project by following these guidelines: before applying stain, make sure your deck has been cleaned properly. sprinkle some water on the deck. if the droplets sink in, the wood is ready to be stained. working with the wood grain, apply an even coat of stain using a 4-inch brush.
water based deck stains also dry much quicker and have far less odor. in comparison to oil based, they do not penetrate as well and lack in performance but there are some exceptions. where an oil based stain will fade over time and be easier to maintain, a water based decking stain will normally peel or flake off once it fails and is
should i finish staining my half-stained deck with rain coming? ask question turns out it was latex based and it was very dry when it started raining. thank you staining teak rails on a boat with an oil based stain but having uneven absorption. 2.
most oil based stains have a strong odor and can expect to have longer drying and curing times compared to water based deck stains. though a longer drying time can be inconvenient it actually assists the stain to accomplish a more even finish. water based decking stains water based decking stains have become increasingly popular in recent years due to stricter voc laws in many states.
however, green-treated, pressure-treated wood should be allowed to dry out for 30-90 days before applying the first stain. always make sure the deck is clean and dry before you begin staining. wait at least 24 hours after washing your deck to apply stain. also, try to avoid staining your deck right before it rains. most stains require at least 2-3 hours for drying.
here is a rundown of the different deck stain types that exist. we encourage you to do your own research to determine which type of deck stain will work the best for your project. deck stains news for 2019. water-based deck stains are environmentally friendly and abide by newer, stricter voc regulations. they are easier to clean up.
for the best results, you should stain cedar, redwood, exotic hardwoods and clear pressure-treated decks as soon as the deck is built and every spring afterward. however, green-treated, pressure-treated wood should be allowed to dry out for 30-90 days before applying the first stain.
water-based stains; the water based stain is usually best used underneath water-based finishes. these finishes do not bond well with varnish or oil-based stains, not surprisingly, unless they dry for a week or more. however, water-based stains do have some disadvantages. for example, water-based stains raise the grain of the wood and they dry really fast.
if the previous layer is oil-based, a water-based stain will adhere better and should be used. weather exposure. the kind of weather the outdoor wood will be exposed to also plays a factor in determining the best stain-base for your project. if the wood is going to be in direct exposure to wind, rain, and sunlight, an oil-based stain is the best choice. this is because it is more durable than a water-base and will provide a more complete protective layer against these elements.
the drying time in oil-based stains is quite long; so, our advice is to apply it during a clear day, at a temperature of 10 degrees c and above, and medium humidity outside. important: when applying an oil-based deck stain, keep in mind that the surface of the wood may slightly get darker.
water-based deck stains. water based deck stains have come on rapidly in the last 4 years. the main reason for the vast amount of water-based stains on the market today is related to changes in voc laws across the country. many states have adopted or soon will adopt lower voc volatile organic compounds regulations.
if you are using latex, if you can get it on for 4 to 6 hours before a light rain, it will have dried enough to survive without spotting. oil based really needs 12 to 24 hours to set up depending on the temp. curing time is a lot longer, but the skim drying is much faster for latex than oil. good luck
the wood has to be fully dry when you stain and it should not rain on the deck for 24 hours after. your low temps do not help the drying the wood and stain. it will take longer.
a water based stain will also retain its color better than oil. they are more breathable meaning they wont trap moisture which can cause a stain to fail. other factors worth noting with water based stains are fewer odors, a quicker drying time, are non-flammable, and they clean up with soap and water. water based wood stains are usually recommended for woods that naturally resist rot and decay, for example cypress, redwood, and cedar. oil based deck stains