cost to replace a stair railing. a carpenter will charge $408 to remove a metal railing and replace it with a 5-foot-long, 32-inch-high prefinished oak railing and balusters on the second-floor landing of a house. this includes the labor and material. a handy homeowner with carpentry skills and tools can do the job for $145,
Seven Trust handrails for stairs like the oak stair railing we're using are more expensive. pine and poplar rails cost less. in addition to the stair railing, you'll need wall mounted handrail brackets, a package of two-part, 90-second epoxy, and about 4 ft. of 2x4.
handrail: $35 for 8' $55 for 12'; you'll be cutting it down to fit rather than joining pieces misc glue, nails, screws to put everything together; paint/stain/finish for seven trust wood. so, materials cost would probably run you about $250-$300; the rest of that quote is direct labor and overhead.
the homewyse oak hand rail cost estimates do not include costs for old stair rail removal and structural reinforcement or modification. the homewyse cost estimates include all typical costs for delivery, unpackaging, installation, adjustment of all handrail and associated mounting components.
oak stair tread installation costs are commonly quoted from a standard rate and can be estimated/quoted by the service professional after measurement and visual inspection at the job site. the homewyse oak stair tread cost estimates do not include costs for old stair tread removal or modifications to existing stairway stringer.
stair spindles installation costs are commonly quoted from a standard rate and can be estimated/quoted by the service professional after measurement and visual inspection at the job site. the homewyse stair spindles cost estimates do not include costs for removal and/or disposal of existing spindle s - or modifications or enhancements to
quote 3d does a staircase banister/railing really cost $1500 installed? oak banister with rounded swirly end post at the bottom. spindles going halfway up the open part of the stairs. then turns into a wall banister with no spindles where the staircase becomes enclosed with a wall. $1400-$1500? seriously? i thought it was around $6-800 at most.
how to refinish your stair railings and sing like adele come on friends; its time to take a little journey. i wish we were going on a classic road trip, complete with car-dancing, crazy wind-blown hair and more mike-and-ikes than one digestive system is equipped to handle, but its not that kind of trip: were headed down memory lane, buds.
at time of publication, internet vendor stair treads stairtreads.com lists its most popular 36-inch-by-11 1/2- inch, 3/4-inch-thick red oak unfinished stair tread at $27.13 per tread; the company defines 'unfinished' as 'sanded and ready for you to apply stain and polyurethane.'
materials cost can vary widely - from about $10/lf for normal strht wood with brass brackets, to easily double to quadruple that for wrought iron, stainless, glass, etc. or fancy mounting brackets, and of course for curved railings too. installation cost probably about $100-150 for a single strht run. ===== now comes the kicker - in a great many areas, they now require returns at the ends of handrails into the protective railings - curved prices that turn into the supporting posts or
a complete makeover for a standard staircase falls on the mid or high end of that price range. new treads and risers usually cost about $1,800 to $2,500. new balusters usually cost about $1,200 to $1,600. a complete makeover including treads, risers, balusters, a handrail and newel posts usually costs $4,000 to $8,000.