what are sips? sip panels are the building material for the 21st century. structural insulated panels sips are a high performance building system for residential and light commercial construction. the panels consist of an insulating foam core sandwiched between two structural facings, typically oriented strand board osb .
all panel seams must be sealed.if desired, other materials such as stone or brick can be applied. also the cement board panels have a fire rating eliminating the need for sheet rock on the interior. the cement board used on thermasave panels has a 25-50 year warranty depending on the cement board manufacturer.
composolite . the modular construction system consists of a small number of interlocking fiber reinforced polymer frp structural components produced by the pultrusion process. the main building panel is 3' thick x 24' wide 80mm x 605mm nominal size and features a cellular construction. panels can be connected using the 3-way connectors,
the combination of sip technology and advanced manufacturing practices enables us to deliver a superior polyurethane structural insulated panel to the marketplace. greenix panels are 'framed and foamed' with conduit and electrical boxes - in the factory for quality control.
pir foam panels laminated with pure embossed aluminium foil are used for fabrication of pre-insulated duct that is used for heating, ventilation and air conditioning systems. prefabricated pir sandwich panels are manufactured with corrosion-protected, corrugated steel facings bonded to a core of pir foam and used extensively as roofing insulation and vertical walls e.g. for warehousing, factories, office buildings etc. .
alaska insulated panels is a manufacturer of polyurethane pur in structural insulated panels sips , utilizing state-of-the art equipment. polyurethane is a superior foam than expanded polystyrene eps or styrofoam which is used by most sip manufacturers.
for an airtight building envelope, ez sips offers the same incredible high-efficiency eps insulation that youll find in leading high-tech green building systems like sip panels and icf insulated concrete forms, but at a fraction of the cost.
some panel manufacturers also offer exterior wall surfaces, typically t-1-11. sandwich panels two facings and unfaced panels are available. unfaced panels typically have structural members i.e. studs in the insulation. facings are added on-site. use panels that have structural grade adhesive linking the cores with the facings.
our foam products are available in blocks and sheets, and can be cut and molded into an infinite number of shapes and sizes. our knowledge, resources and reliability make us a valuable asset for builders and construction professionals who demand competitive prices and fast delivery of eps, styrofoam brand foam insulation and other foam building
foam insulated panels. the panels consist of 3 layers: 1 the exterior metal skin available in several options, 2 the foam insulation core available in several thicknesses, determining the r-value 7.5 per inch , 3 the interior metal liner. on site installation of the panels can reduce labor time by up to 50% compared to traditional multi part installation.