jet washing the deck produces a similar result. there are areas of the deck where it seems to have bonded quite well and just can't be shifted. around a third of the decking surface is not at all flaky and the brushes have no effect at all. the jet washer will remove it when set to a very narrow jet but this just chews up the surface of the boards.
we'll show you how to strip existing stains and oils from your deck, taking it back to bare wood. how to strip old wood or deck stain or paint - duration: 2:24. olympic stains 1,109,453 views
paint on decking boards adds colour to the wood and helps protect it from the outdoor elements and wear from foot traffic. unfortunately, paint on outdoor decks tends to wear out and chip or peel over time. when paint becomes old, homeowners may have to remove it and reapply a new paint or finish to make it look as neat as possible.
looking for a fresh start on your old wood surface before applying a new coat of stain? learn how olympic stain stripper removes old coatings, stains and mildew to prepare your deck for a fresh
removing paint from grooved decking 29th jun 11 at 7:59 pm 1 ; over the last few years i have put a coat of decking paint on each year. wish i had never started this as it chips. i am in the process of removing it all so i can stain the decking. the area is about 15ft x 12 ft.
related articles. apply the paint stripper with a paintbrush to a 10-by-10-foot section of the deck to soften the remaining paint. start at the far end of the deck and work toward the stairs, making sure you cover every area of the deck within the section that is covered with paint, including the rails.
used this bit.ly/pressurewasher to remove and strip paint off my deck using a pressure water jet and a citrus based stripper, it was so easy click
first, scrape off as much of the old solid color deck stain as you can with a paint scraper as a deck stripper. as you scrape the wood, reset any nails or screws that stick out from the wood surface. next, strip the deck with a special deck stain remover 1 gallon covers 100 sq. ft. .
to be fair it looked good and now have a nice flower bed around it and ideal area to sit in summer. the boards we have are now looking a little grotty they originally came from a pub that had closed down and the dark colour of them looks a bit dull and drab in the garden.
re: what would you suggest to remove paint from a wood deck? « reply 9 on: february 06, 2007, 05:23:02 pm if using a chemical stripper on anything exterior be sure to check with local and state regs, especially if the structure is near a body of water or community aquafer.
uk clean ltd, cleaning old paint from wooden decking 150 lts per min 150 bars of pressure. you can trust us to get the job done.
sorry for the interruption. we have been receiving a large volume of requests from your network. to continue with your youtube experience, please fill out the form below.
how to strip old paint off of decks applying paint stripper. when choosing a chemical stripper for your deck, rinse and neutralize. wash the deck with clean water either from a hose or a pressure washer. sanding and new finish preparation. allow the wood to fully dry and then sand
the simplest way to strip off old paint from a wood deck surface if it is old and already flaking off is to use a pressure washer. but i caution you to be careful and not set the pressure too high nor spray the wood from too direct ie strht down and angle.
the right way to clean up a paint stripping job. 2. vacuum the entire work area with a vacuum equipped with a hepa filter to pick up any dust and debris. 3. wipe surfaces with a damp cloth or sponge and a household detergent; empty the dirty rinse water into a container, never a sink, bathtub, or toilet.
these are what i need to do, i am not sure if the decking on the gazebo is the grooved one, i'm quite sure there was some grooved decking on at least one part of the house that i need to do. i want to get it done to a high standard and i hate hand sanding so want to get a tool to do the hard work for me.
before you start, brush any dirt off your deck and place a cover over any plants around it. put loads of stripper on and work in small sections. don't paint yourself into a corner, the surface will be slippy while it's working, so be careful. when it's stripping, it doesn't blister or fizz, so don't worry if you can't see anything happening.
grooved old /new decking - paint and removal queries i've pressure washed the deck and removed about 50% of the paint, alot of paint is still in the grooves very annoying to get out. mind i have old decking and new, should i be going with a semi transparent stain? i'm worried that i've spent so long stripping the old paint off, that i