refinishing plastic composite doors

how to refinish fiberglass doors doityourself.com

refinishing fiberglass doors is a difficult undertaking because they are simply so many facets to a door. the door itself is not the only part; when you are planning on refinishing, you must also consider all that surrounds the door to make sure it looks just right and functions properly.

can and should you paint your composite door? falcon

composite doors are designed to last, including the original paint for composite doors. their composite door colours will stay looking fresh and new for many years to come. with only the occasional wipe down you can easily keep a composite door in tip-top condition as they are low maintenance.

busted how to fix broken plastic trim

all is not lost, however. once cured, the bed liner can be top coated with any paint to match your interior. that is all there is to this simple plastic repair and refinish project. this process is good for door panels, consoles, a-pillar trim, just about any plastic component that needs repair and restoration.

same-day stain and topcoat instructions: fiberglass doors

need help on how to apply same-day stain and topcoat to a therma-tru fiberglass door? well, look no further. we're here to make the project and process a success to bring new life to your door

doc1frfa

pre-stained fiberglass door system refinishing instructions removing the old finish before starting the process of refinishing the wood-grain fiberglass door, please keep in mind that the refinished door may not have the look and detail of the factory finished door. the quality of the

staining exterior door the seven trust community

staining exterior door. let the remover sit for 15 30 minutes and scrape off the remover and finish with a plastic scraper while being careful not to gouge or mark up the door. use a plastic stiff bristle brush in the corners and hard to reach areas. repeat as necessary until all of the topcoat is removed.

refinishing fiberglass/plastic doors

i thought that i had a fiberglass front door, but am now told that it may be a plastic composite. my house is 5 years old, so is the door. it was originally stained and clear coated possibly polyurethane . it is an 8 tall door. it needs to be refinished becuase the finish is pitting and flaking off it gets about 4 hours of sun every day .

fiberglass entry door refinishing home guides sf gate

fiberglass entry doors require refinishing periodically to maintain their beauty and charm. the process is not difficult, but it can be tedious. often, you must not only refinish the door, you

how to repair and paint plastic coated melamine cabinets

danny lipford: some cabinets have a plastic melamine surface coating, rather than being painted or stained. when this vinyl coating begins to peel, you can either remove all of the coating and repaint, or simply repair the damaged areas. repair is far less time consuming.

how to look after your composite door

heres how to care for your new composite door. wooden front doors are not as easy to maintain as composite doors. wood is porous and must be correctly protected in order to prevent the door from rotting or warping. you must finish the door with a quality product and keep the finish topped-up so the door continues to fit and to function.

how to refinish and restore an entry door today's homeowner

entry doors take a lot of abuse from the elements. if yours is looking a bit shabby, perhaps its time to dress it up by refinishing and replacing the hardware. by following these simple steps, you can turn an eyesore into the envy of the neighborhood. steps in refinishing an entry door: use a hammer and nail to remove the hinge pins.