how to install a stockade wood fence easily. how to make 2 gates out of 1 fence panel wont sag diy woodworking with minimal tools - duration: 11:46. a glimpse inside 119,705 views
outline your proposed fence line with spray paint, then measure the outline of your fence perimeter with a measuring wheel. use chalk lines as a guide. position the fence posts every 6 to 8 feet along the line where you want the fence to stand.
typically the two most important components of a fence are the posts and the sections. fenceposts need to be a minimum of 2 feet in the ground: a good rule of thumb is one-third the length of the post.
installing an aluminum fence. an aluminum fence is a great way to keep in your animals and add some decoration to your yard. aluminum
cost to build a stockade fence. a fence contractor will charge $1,196 to build a 50-foot long, 6-foot high wooden stockade fence, which includes labor and material; but you can buy the materials and build it yourself for $560, saving 53 percent. add more to the budget if you want to seal the fence sections with a wood finish.
stockade fence. this type of fence is built the same way as a traditional picket fence, with horizontal stringers running between horizontal posts; the vertical pickets are then attached to the stringers with nails or screws. buying pre-cut pickets will both speed up the job and make the project easier for do-it-yourself fence builders.
related to: if you have a swimming pool, you must have a fence. most local codes will dictate that you have a fence that's at least four feet high with a self-closing gate. when people try to build gates themselves, they inevitably undersize the hinges, and the gates weigh too heavily on them.
install the fence pickets one of the keys to installing fence pickets is keeping the tops at a uniform height. for this fence, the bottom of pickets will be about 1-1/2 inches above the ground.
insert the stockade panel, checking that there is an inch or two clearance at the bottom of the panels from the ground to allow the wind to blow through underneath and to prevent contact with the ground. the stockade will rot as any wood will if the stockade has contact with the soil and water. step 3: paint or polyurethane