what is the height requirement for building metal platforms

five key osha standards for work platforms

it also established requirements for the performance, inspection, use, and maintenance of personal fall protection systems. here is a list of five current osha standards for work platforms that you may not be aware of. 1. any working surface 4 feet or higher must be protected with guardrails on all sides at least 42" tall.

industrial work platforms & prefabricated equipment

extra supports can be incorporated into any part of the platform for equipment load point concerns. our industrial work platforms can be configured around existing equipment, buildings or structures for a complete use of existing workspace. here are a few points to consider when planning an industrial work platform for your company.

faqs about mezzanine, work platforms, equipment platforms

click on any of the questions below to reveal answers to the most frequently asked questions we hear about steel mezzanines, work platforms and other steel equipment support and storage structures. we cover questions on mezzanine engineering, siting, field measuring, stairs, ladders, clear height and more.

ubuntu server: a cheat sheet - techrepublic

ubuntu server is an open source platform that does more than you might think. with its ability to serve as an internal company server or to scale all the way up and out to meet enterprise-level

1926.451 - general requirements. occupational safety and

the top edge height of toprails or equivalent member on supported scaffolds manufactured or placed in service after january 1, 2000 shall be installed between 38 inches (0.97 m) and 45 inches (1.2 m) above the platform surface. the top edge height on supported scaffolds manufactured and placed in service before january 1, 2000, and on all

fixed and portable ladders- a guide to osha rules

in addition, the following general requirements apply to all ladders, including ladders built at the jobsite: two or more separate ladders used to reach an elevated work area must be offset with a platform or landing between the ladders, except when portable ladders are used to gain access to fixed ladders.