when installing a fence on a hilly area, there are three methods you might utilize to successfully install a fence around your property. racking . by running the fence following the slope of the ground you, this method will produces an unleveled fence top; however, there will be no visible gaps between the ground and the bottom of the fence.
related articles. install the pickets by screwing them to the top and bottom rails with 1 1/2-inch exterior wood screws. install the first picket at one side of the gate and work around the fence to the other side. use a level to keep each picket vertical, and keep the tops of the pickets a uniform distance from the top rail.
when installing a chain-link or metal fence, the angles of the rails are usually adjustable to some degree. if the slope exceeds 12 inches across a 6-foot length , you must usually use the stepped method.
stepped fence built using preassembled panels. when building a stepped fence, the posts on the slope need to be longer to accommodate the extra height of the fence panel. each post is installed and cut to length individually, depending on the slope at that particular spot. filling gaps in a stepped fence. since the panels on a stepped fence are level, there are gaps at the lower end of each panel.
a 36-foot slope and a fence with 6-foot panels needs six panels on that slope. step 6 divide the drop of the hill by the number of fence panels to establish the distance each panel must step down on that slope.
pictured are 3 different ways to deal with installing a fence on a slope. cedar fence design and installation in maine - faqs apparently the technical term is 'racking' - we think this looks better on a steep incline rather than stepped or strht residential or commercial, steep or low-slope, glennstone roofing and gutters can handle any type of roof installation or maintenance. installing-a-fence-on-a-slope see more