railing installation - vinyl fence home railing installation - similar to railing installation - vinyl fence wood or vinyl deck installation the simplest and most ecomonical method for installing vinyl railing on a wood deck or stair is to use a concrete installation.
step 3 attachment. you will need to use a post plate mounting system of steel for your aluminum porch railing. you will attach your first post onto the wall using your mounting brackets. one that is near the top and one that is above your baluster rail baseline will be needed.
these are the installation instructions for the wedge anchors. once the center post its secured to the concrete your next step would be to address corner posts before actual railings go in. there is two ways to do this; you can wrap up corner post with vinyl boards 1x or build a temporary support remove post and install a post sleeve.
how to install deck rails to concrete ehow. deck railing, whether it be made of wood, metal or plastic, is constructed in sections to install deck rails to concrete, you have to drill the concrete and bolt the
measure your desired height from the top of the concrete step handrail going down and mark it with your pencil on the post. do this for each post and the mark should line up with the top of the treads after youve installed your railing. step 3 - measure from bottom up. you should now measure about 3 inches from the bottom up on each post.
before you fasten the brackets to the post or column with screws, make sure the rail is level. then insert the pickets at the bottom of the rail into the routed holes. step 4 - install the top rail. hold the top rail at an angle above the pickets to install it, sliding it into each picket one at a time. check that the rail is level vertically.
railing installation - vinyl fence. wood or vinyl deck installation the simplest and most ecomonical method for installing vinyl railing on a wood deck or stair is to use a concrete installation.
rout holes into the top rail to insert the pickets. level the brackets and secure them with the help of screws. weld the seams using a heat gun and flatten the ends with a roller. this will provide a waterproof seal to the railing. use screw caps to cover the screw holes on both sides of the railing.
step 4 - attach your porch railing to a concrete floor. use a steel post plate mounting system to attach your vinyl porch railing to a concrete floor. attach the first post to the house wall with the mounting brackets, one near the top rail and one just above the baluster rail baseline. set the base plate under the post.
this guide applies to all railing kits using a concrete mount for concrete and will help make your installation easy. if you have any questions, please call 1-888-743-3673 - we're happy to help