how to anchor a vinyl fence post to concrete wall . how to anchor a vinyl fence post to concrete wall. as a leading global manufacturer of wood plastic composite product, we offer advanced, rational solutions for any .
i'm having some poured cement retaining walls installed around my house in the next few weeks and want to have something to work with in the way of fence/railing posts when they're done. i welcome any suggestions on what to set into the cement. i can pretty much work with either wood or round metal posts. someone told me it's not allowed to set metal posts all the way into a poured wall.
how to install a fence on a concrete surface. depending on the strength of your concrete, you can either drill all the way through like in solution 2, or set the chain link fence posts with hydraulic cement. if you are installing a wood fence then you will want to use the wood to steel fence brackets.
the steps to attach timber to concrete using masonry anchors are as follows: step 1: first of all position your timber in place and pre-drill if necessary the hole in the timber where you want the concrete anchor to go. personally l don't pre drill.
drive the anchor through the wood and concrete. keeping the wood and concrete holes aligned, position the fastener into the hole and hammer it through. after driving it through the hole, the concrete fastener should expand at the back and wedge itself tightly into the concrete.
how to anchor post to concrete. consequently, in order to anchor a post to concrete, you need to paint its bottom section with wood primer, as to make sure it will resist against moisture. sand the bottom section with a band sander, it it doesnt fit in the anchors. attach the post in the anchor, tapping it slightly with a rubber mallet,
place a washer over the threaded end of each washer. thread a nut onto each anchor. insert the wedge ends of the anchors into the pre-drilled anchor holes. press the hinges flush against the block fence. pound the tips of the anchors' threaded ends with a mallet or hammer to expand the wedge and secure the anchors to the fence.
as you can see for this job the fence ran a long distance in front of the house with a height change at one end. the height of the fence and the touch of green between the fence and the road side makes for a beautiful look.
a 4' fence on concrete wall also check out this case study from someone who built a beautiful 4' cedar fence along the front of their home. this is a very common application for the post anchor and if you want something that looks good at the front of your house, you will see why it excels.
shannon from www.house-improvements.com shows you different fasteners you can use to fasten wood to concrete. this is especially useful in basement de
how to fasten anything to concrete. to ensure a solid attachment, be certain to use the drill bit recommended by the screw manufacturer, and bore the hole about 1/4 inch deeper than the screw
mounting a wood fence on top of a concrete retaining wall quotes for a 12 inch high concrete retaining wall with fence attaching wooden fences to concrete concrete wood for retaining wall, fence ..>> attaching a post to a concrete block wall - welcome to the need to repair a fence.
i have a chain link fence that is on a concrete retaining wall between my property and neighbour's property. it is about 3'-4' in height and i was originally thinking about attaching a wooden fence to the existing fence posts. the fence i would need to build would be 5'-6' in height and i think the present fence posts are extremely solid and would hold the wind forces.
fastening wood quickly and securely to concrete is a simple job with this method from my contractor's 'bag-o-tricks'. learn how to use standard construction screws to attach wood or just about
2' anchors are required for a 6' tall wood fence. such a fence is heavy and must withstand even light winds, due to the large surface of the fence. using heavy duty metal posts instead of 4x4 wood posts will prevent rot. make sure no water is left to sit around the posts where they enter the concrete blocks, to avoid the possibility of rust.