the plastic is often used as an insulator for electronics and in the automotive industry. epoxy glass epoxy glass is a plastic material that is made from an epoxy resin and fiberglass cloth. the material has great electrical properties as well as good mechanical strength and stability.
plastic material selection guide (at curbell plastics) author: curbell plastics supplier of high quality thermoplastic materials, technical assistance, custom plastic fabrication subject: what most important to the application? temperature, cost, mechanical properties, electrical insulation, fda, chemical resistance?
the royole flexpai, which is due to start shipping in december, uses a plastic material to cover its screen while samsung is rumored to be using a similarly transparent polyimide alternative for
hi all, i'm intrigued by demeyere's "controlinduc" nonstick pans (out of my price range though so really just curious) and noticed that the ones they sell in the us use a grey thermolon coating, whereas ones sold in europe all seem to have a black coating with the cringe-worthy name "ecoslide duraglide ultra."
poll: can xenomorph acid melt vibranium (71 votes) certain materials are also more resistant to certain types of acid. in the above scan, misty seemed to know what type of acid to use to break
the materials you can use to produce 3d prints have exploded over the past few years. one of those materials is wood (or "wood"). having been provided a spool of filament, i decided to put it
mechanical properties of plastic materials material formula abrasive resistance - astm d1044 mg/1000 cycles coefficient of friction compression set after 24 hr at 175c % compressive modulus gpa compressive strength mpa elongation at break % hardness - rockwell izod impact strengt h j m-1 poisson's ratio tear strength n mm-1 tensile modulus
1 material properties of plastics 1.1 formation and structure the basic structure of plastics (or polymers) is given by macromolecule chains, formulated from monomer units by chemical reactions. typical reactions for chain assembling are polyaddition (continuous or step wise) and condensation polymer-ization (polycondensation)  (figure 1.1)..