rail-2-ledge - 50 pts transfer a grind from a rail to a ledge near the trailers. rail-2-rail - 50 pts transfer a grind between two rails on the angled walkway leading up to the conveyor area (large, rusty, brown building). rail-2-track - 50 pts transfer a grind from the short rail near the trailers to the train tracks.
you can't set the iq outdoor on a picnic table on your back deck railing and call it a day -- it doesn't have a typical camera base. instead, it comes with mounting brackets designed to let you
punch his lights out too and you'll be safe for now. find the chain on the back wall but don't climb it. just to the left is a lever you can interact with. do so and the chain's position will be moved. climb it now and get to a good height, then jump to the platform on your left. turn around and go strht across to the opposite wall.
jump upward on the rs platforms until you have reached the third height level. then jump to the suspended life buoy overhead and swing across to the red button that activates the conveyer belt. hit the button. collect 16 snacks and 1 key on the conveyer belt. move us to the next deck and collect 6 snacks that appear in an arc in the air.
how to increase the height of an existing railing by 4" by ron (milton, ontario) i have an 80' deck which is 12' off the ground. the deck rail was built to a height of 38". i am in ontario and the building code here requires it to be 42" high.
what is code for deck railing height? the irc requires guardrails to be at least 36" in height measured from the deck surface to the top of the rail. commercial decks attached to multifamily buildings regulated under the international building code (ibc) require 42" high guardrails.
deck railing height requirements. deck rail height . measure from the deck floor to the top of the rail between posts. this must be at least 36" high to meet irc requirements. make sure your sweep space and all infill openings will not allow a 4" sphere to pass through.