the only way to install the wrought iron fencing on a slope is to stair step the fence. the strength and durability of wrought iron is the biggest advantage of this type of fencing. you just have to sacrifice the ability to follow the grade of your property with this style.
bob talks with a fencing expert about installing a white-cedar fence in sloped areas at the melrose house. installing a fence on a sloped site bob vila. how to build a wood fence on slope
mount the gate in the vinyl picket fence. mount the remaining vinyl picket fence sections and posts on either side of the gate, ensuring posts are plumb and leave enough space for the gate section. install provided hinge and latch hardware with bolts and screws.
install the first picket at one side of the gate and work around the fence to the other side. use a level to keep each picket vertical, and keep the tops of the pickets a uniform distance from the
step 3 install the fencing. install wood slats or pickets a uniform distance from the ground. you can either set them vertical or perpendicular to the rails. if you choose the first option, you may have to cut the bottoms to conform to the slope of the ground.
racked fence with individual pickets following the slope. one advantage of a racked fence is that the length of the posts and pickets remains the same throughout, regardless of the slope. since youre building the fence from scratch, it can hug the ground in a close curve without gaps under it. start by setting the posts plumb and at the same height from the ground.
instead of angling the rails and pickets of the fence to match the changing elevations of a sloping yard, stepping involves installing the fence panels horizontally. the changes in elevation are made up for by extending the posts and hanging the fences at a height that clears the ground beneath.
4. assemble the fence rails and the posts. use the rack method to install the fence on a gentle slope, and install the fence on a slope steeper than 35 degrees using the step method.
with the posts set, cut 2x4s into twelve 8-foot lengths for horizontal fence rails that will support the pickets. from the base of each post, measure up 12 inches for the lower rail and 36 inches for the top rail. make a mark at 90 degrees on the back of the posts image 1 . attach the rails using two 3-inch galvanized steel drive screws image 2 .
lets look at some of the techniques you can use when installing a fence on a slope or a hill. contoured fences: smooth lines for gentle curves near west chester, pa: a scalloped partial privacy fence installed on a slope by the fence authority. when building a fence on uneven terrain, one option is to follow the contours of your yard.