how to stain a wood fence. you can also apply stain with an electric cup sprayer. move the sprayer vertically to apply stain with the wood grain on the fence. 5. rent an airless sprayer, which ds stain from a 5-gallon bucket. spray stain onto all surfaces of the fence. be sure to maintain the proper distance from the fence and overlap each pass.
staining a fence with solid stain covers up inconsistencies in the wood. learn how to stain a fence with semi-transparent stain using staining tips in this free video on fence staining.
instead of trying to answer all these questions in one pass, lets will focus on how to apply wood stain spray using a hvlp high volume, low pressure sprayer. many woodworkers stay away from using a hvlp sprayer to stain wood because it seems too difficult to get a good finish.
stain can be sprayed, brushed, or rolled onto your fence. the best application method is a combination of a roller for speed and a brush for details. spraying tends to waste a lot of product in overspray, and may not coat as thoroughly as rolling.
the manufacturer of our stain says you can 'spray, roll, or brush.' however, in practice, the semi-transparent and solid color stains contain more solids and tend to clog the tip of pump sprayers. you will also find that the manufacturers allow you to 'thin with up to one-cup per gallon.'
once a panel was fully coated i used a synthetic paint brush to back-brush the stain into the fence. this helps the stain penetrate the wood rather than sitting on top and also avoids any runs. the stain dries really fast when sprayed on, so you really need to alternate between spraying and brushing while the stain is still wet.
spray the fence with the wand positioned 18 inches away from the boards and work evenly from top to bottom. step 2 apply a wood preparation product to the fence when washing if stains from algae, mold, mildew or fungus are present.
select the spray tip thats best suited for the stain you are using and the surface to be sprayed. in most cases, a tip with a narrower 8-inch-wide spray pattern and a .013 hole size will give you the best control. be sure the tips hole size does not exceed the maximum capacity of your sprayer see spray tip info .
but in order to do a fine job as well as getting the job done pretty darn quick, you will need the best stain sprayer for fence. it is simply not enough to pick any old sprayer. the best stain sprayer for the fence should be able to spray your stain in a fine finish with top notch control.
how to properly use a deck stain sprayer youll find it easiest to apply the deck stain if you spray all of the railings before you move on to the deck itself. once you finish the job, be sure to give the stain plenty of time to dry while you clean out your sprayer.
hold the tip of the sprayer about 10 inches from the fence, squeeze the trigger and with slow and steady strokes, spray the stain down and up onto each board. if the spray is too narrow or wide, twist the nozzle at the end of the wand until you have the desired spray pattern.
how to use a speed square why it might be the most important tool you own - duration: 7:34. perkins builder brothers recommended for you
any stain can be made into a spray/no-wipe stain by thinning it. even stains sold as no-wipe stains can be thinned more for better control. the trick is to thin the stain enough so you build the color with multiple passes. if you try to get the desired color with too few passes, youll get uneven streaking.
the father in-law has leant me his fence paint sprayer and i can foresee it will save a lot of time compared to karate kid style 'uuup ' 'doown '. looking at the price of the sprayable cuprinol paint, it isn't cheap so i was thinking perhaps i could thin out the normal fence paint to a viscosity that will work with the sprayer.