in architecture, a baseboard (also called skirting board, skirting, mopboard, floor molding, or base molding) is usually wooden or vinyl board covering the lowest part of an interior wall.its purpose is to cover the joint between the wall surface and the floor. it covers the uneven edge of flooring next to the wall; protects the wall from kicks, abrasion, and furniture; and can serve as a
i would do the flooring first and put the skirting board last. polished floorboards - skirting is last. when i laid our solid timber floating floors, i removed all skirting and then put new skirting boards on after. looks much better than quad, which in my opinion looks like it is there to hide an irregular join.
the following is a script from “the arctic frontier” which aired on oct. 2, 2016. lesley stahl is the correspondent. rich bonin and ayesha siddiqi, producers. the sea ice over the arctic is
capitol get there *** the back, bottom floor of the capitol ===== easy, there's tons of places to manual and grind. the first marker is main street, the second right side of the school, an the last on the school's shack. trolley car nail ** the trolley car near city park ===== grnd down the right rail for speed.
hi - i have followed these boards and just laid a new floor in the kitchen and although not perfect it isn't bad. i removed the skirting and tiled up to the walls. the old skirting was just that cheap 2.5 inch pine stuff that seemed to be nailed into the walls with 4" nails for some reason. as a result lots of the plaster came off as well.
we currently just have bare floorboards and need new skirting boards all round the room. but which do we need to do first, lay the flooring (probably laminate in dining area and tiles in kitchen) or get the skirting board done? and could just one tradesman do this for us or would we need separate ones for each job?
for cleaning carpets and hard floors. to activate brushroll, step on floor nozzle and tilt handle back. use powered lift-away to reach under furniture to clean carpets and hard floors. upright powered lift-away use the wand in lift-away mode for more reach when cleaning above-floor areas like coving or skirting boards. lift-away with wand
emulsion paint for walls and ceilings can be applied direct to old painted surfaces, once cleaned and sanded, with two coats normally being required. if painting the whole room, start with the ceiling first, then the walls and then doors, windows and skirting.