mushrooming: a common composite decking problem that is unsightly and preventable. board cracks and splits: a very dangerous side effect of face screwing and nailing deck boards. each of the above decking problems is completely preventable if you use the right deck fastener system along with the right method of deck installation.
composite decking is an alternative to all-wood decking, made of materials that can include recycled and new plastic, pvc, bamboo, and wood fibers. they can be installed either by driving screws or nails through the faces of the boards or with hidden fasteners. ends of planks are normally covered with matching fascia boards.
did you fasten the wooden deck boards with nails or phillips-head screws? well, things have changed. the boards are held down with composite deck screws that countersink themselves. the holes are then filled with plugs cut from the exact material the deck boards are made from, making them virtually disappear. it has a rubber face and a
composite decking is now faster to install and easier to remove thanks to this special nail gun from tiger claw. the pneumatic gun shoots hidden fasteners, called ballistic nailscrews, into the edge of composite decking to secure the decking to the floor joists while allowing for easy removed. watch
screws vs. hidden fasteners while the difference between using hidden fasteners and face-screwing your deck floor is mostly a cosmetic issue, there are a few other considerations. there is a hidden fastener for just about every decking product; and there is a color-matched screw for just about every product too.
the new fastenmaster trapease 3 is the only fastener guaranteed to create a clean finished look without predrilling in all three types of synthetic decking: composite, pvc and capstock. three
what type of fastener can i use for wood deck board? standard wood decking is pretty versatile in how it can be assembled to the deck frame. the least expensive option for installing wood deck boards is to use framing nails, though we don't necessarily recommend them. you'll see a lot of builder-grade decks assembled with framing nails, which
installing a tropical Seven Trust deck with a species like seven trust or seven trust is done the same way as your typical pressure treated pine or even composite deck: seven trust clip and other hidden fasteners or face screwed. each deck fastener system method has pros and cons. face screwing is fast and secure but it leaves exposed screw holes that many find
we do not recommend using nails or a nail gun when installing veranda composite decking. the composite material is so dense that nails often cannot penetrate adequately without bending. moreover, when fastening veranda deck boards, all holes should be pre-drilled to prevent the material from mushrooming over the fasteners see above and to