we installed this tongue and groove siding vertical. the first step was to use a level and install the first piece plumb. we started at a corner since all four corners were going to have corner board trim installed. [note photo example. the actual installed board would be closer to the corner] how to install tongue and groove siding
tongue and groove paneling is an option for finishing the walls or ceiling of a room that is attractive and relatively easy to do. paneling can be installed during construction or, almost as easily, over the top of existing finished walls. several techniques for installing paneling are common, each
every time i install a plank wall or ceiling, i get asked tons of questions. i’ve already covered installing plywood v-groove plank walls. and a plywood plank ceiling! in this post i’ll share everything i know about how to install a tongue and groove plank wall. choosing wood for a tongue and
how to install vertical tongue-and-grove siding. in order to provide a good nailing surface for vertically installed tongue-and-groove siding, figure 1, the plywood sheathing underneath vertical siding should be thicker than that used for horizontal siding applications.
the completed tongue and groove wall. i can not emphasize enough how much i love my new dining room wall! the tongue and groove make it feel so structural and substantial in a cool way. plus the bright white paint opens up the space for a much fresher feel! every time i walk through my dining room and see my new tongue and groove wall it makes
how to install tongue and groove paneling on walls and ceilings you can create a new look in any room when you use tongue & groove wood paneling for walls and ceilings, and with reclaimed barn wood or rustic paneling from the woodworker’s shoppe , you can create completely unique interior spaces that evoke the past.
every time i install a plank wall or ceiling, i get asked tons of questions. i’ve already covered installing plywood v-groove plank walls.and a plywood plank ceiling!in this post i’ll share everything i know about how to install a tongue and groove plank wall.
tongue & groove installation. tongue and groove siding can be installed horizontally or vertically. in horizontal application, start at the bottom and work up with the groove edges facing downwards. siding up to 6 inches wide can be blind nailed with one siding nail per bearing toe-nailed through the base of each tongue.